Industry News

Home / News / Industry News (Page 5)

Explanation of the structure of CNC machine tools, the materials used and the choice of tools
07-05-2020
The tool selection and cutting amount determination in CNC machining are done in the state of human-machine interaction, which is in sharp contrast to ordinary machine tool processing, and also requires programmers to ma...
Common tool types and applications (2)
29-04-2020
1.broach The internal broach is used to process the inner hole surface of various profiles, and the name of the broach is generally determined by the shape of the processed hole, such as a round hole broach, a four or si...
What are the types of milling cutters and their uses
24-04-2020
What are the types of milling cutters and their uses Generally divided into: 1) Flat head milling cutter, rough milling, removing a lot of blanks, fine milling of small horizontal planes or contours; 2) Ball-end milling ...
Introduction to hole machining tools
16-04-2020
One is a tool for processing holes from solid materials; the other is a tool for reprocessing existing holes in the workpiece. Commonly used drill bits are twist drill, flat drill, center drill, deep hole drill and sleev...
Types and applications of turning tools
10-04-2020
1. Turning tool There are the following types of turning tip generally used: (1) Rough turning tool: It is mainly used to cut a large number of redundant parts to make the diameter of the working object close to the requ...
Introduction of common tools
03-04-2020
1. Turning tool Turning tool is the most widely used tool in metal cutting. It can process outer circles, end planes, threads, inner holes on lathes, and can also be used for grooving and cutting. Turning tools can be di...