After each use of the meat grinder, the meat grinder tee, screw, blade orifice plate, etc. must be disassembled, and the residues must be removed before reinstalling in the original order. The purpose of this is to ensure that the machine and processed food are hygienic on the one hand, and on the other hand, it can ensure that the meat grinder parts are flexible in disassembly and assembly, which is convenient for inspection and replacement. The editor introduces how to disassemble and clean the meat grinder.

Fenghua Zhuoyue Metal Products Co., Ltd. is China Meat Grinder Spare Parts manufacturers, supply  meat grinder tee, screw, blade orifice plate
The meat grinder is easy to be cleaned after being used for a long time. At this time, it is necessary to disassemble the meat grinder and clean it thoroughly. When disassembling the meat grinder, the loading tray must be disassembled first, in order to prevent the debris in the loading tray from falling into the inside of the machine. The main disassembly tool of the machine is the disassembly wrench, which must be disassembled in a clockwise direction. , Follow the installation order for disassembly and assembly. First remove the nut on the front of the machine, then remove the meat plate and the meat grinder, then remove the pushing screw, and finally remove the T-shaped meat grinder pipe. The removal is carried out in the order of installation to ensure that the machine is installed after cleaning. The correctness of the machine is prevented from affecting the normal use of the machine due to incorrect installation of parts.
The meat grinder should be cleaned in time after use to ensure the machine's future use. When cleaning the meat grinder, use a brush to clean all the residues in the reamer slot with clean water. After cleaning, use a cleaning agent to wipe off the residue on the cabinet to avoid affecting the whole cabinet. Appearance, after cleaning, use a clean cloth to wipe clean the remaining detergent on the cabinet. After scrubbing all parts, use a 75% ethanol solution to scrub all the surfaces of the machine, and place them in a ventilated place for natural air drying. All residual materials on the machine should be stored in waste containers. Wipe the machine clean with a clean cloth. It is strictly forbidden to ignore it to prevent the machine from corroding due to the residue of residue.