A meat grinder is a meat processing company that processes raw meat into granular meat with different specifications according to different technological requirements during the production process. It is widely used in various sausages, ham sausages, luncheon meat, meatballs, savory flavors, and pet food. And other meat products industries. It is made of (cast iron) or stainless steel, which has no pollution to processed materials and meets food hygiene standards. After special heat treatment, the tool has excellent wear resistance and long service life.
The meat grinder is simple to operate, easy to disassemble and assemble, easy to clean, and has a wide range of processed products. After the material is processed, it can well maintain its original various nutrients and has a good fresh-keeping effect. The cutter can be adjusted or replaced at will according to actual requirements. After assembling or replacing the reamer, the fastening nut must be tightened to ensure that the grid does not move, otherwise the relative movement between the movement of the grid and the rotation of the reamer will also cause the effect of refining the material. The reamer must be in close contact with the grid, otherwise it will affect the cutting efficiency. The screw feeder rotates in the wall of the machine to prevent the appearance of the screw from colliding with the wall of the machine. If it touches slightly, the machine will be damaged immediately. However, the gap between them should not be too large. If the gap is too large, it will affect the feeding efficiency and squeezing force, and even cause the material to flow back from the gap. Therefore, the processing and installation requirements of these parts are relatively high. But if you find that the meat grinder is rusty, the meat grinder is undoubtedly a waste of good materials, then how can we solve the problem of rusty meat grinder?
Generally, if metal and iron products are rusted, physical methods can be used to remove the rust. However, if the surface of the iron product is not flat, it is more difficult to use physical methods. As the inside of the meat grinder is spiral, we cannot use simple methods to remove the rust. Here are a few simple methods for your reference:
1. Use fine sand and yellow mud to mix properly, put it in the meat grinder for mixing, let the fine sand and yellow mud remove the rust in the meat grinder. But be careful not to install the blade, otherwise the blade will be damaged.
2. You can buy some rust-removing sprays from the store, and the rust can be removed by spraying. But this method does not know whether the rust removal is poisonous and whether it can be cleaned up.
3. There can be a meat grinder soaked in rice water. It takes a few days to use very thick rice soaking.