News

Correct operating procedures and cleaning of meat grinder

Update:18-11-2020
Summary:

Correct operating procedures and cleaning of meat grind […]

Correct operating procedures and cleaning of meat grinder

1. Each time you use the meat grinder, you have to rinse it briefly. Generally speaking, the meat grinder is cleaned in time after the last time it is used up. The cleaning before use is mainly to wash away the floating dust inside and outside the machine. Another advantage is that the rinsing before use will make the minced meat easier and smoother, and it will also make the cleaning after work easier.

2. Many people like to install the machine completely after each mincing, but this method is not preferable. Ideally, after each use, the cleaned meat grinder should be placed in a wooden cabinet in the form of loose parts, or it should be completely dried before assembly. It is not advisable to assemble it immediately.

3. The installation starts with the assembly. First, feed the roller into the machine cavity. In order to reduce wear, drop a drop of edible oil on the shaft, and then install the knife head on the roller, paying attention to the knife edge facing outward. Then install the leak to the cutter head, gently shake to make the three closely fit the machine cavity, and then install the solid nut to the outside of the leak, pay attention to the tightness, too loose will cause the meat to leak from the edge seam, too tight will cause Damage to the wire mouth. Install the twist handle after zui, pay attention to the handle facing outwards, align the notch with the rear sleeve, and then screw on the firm screw.

4. The installation of the machine is relatively simple. The most important thing is to choose suitable fixing parts, such as a relatively large wooden chopping board, align the bite with the chopping board, and tighten the fastening screws behind the edge. Because the meat is relatively hard, it is best to use a screwdriver and other tools to help secure the machine to prevent the machine from loosening during work.

5. The real minced meat is relatively simple, because it is more forceful, it is best to have a male operation, or two people can cooperate. If the dumpling is minced, it is best to mince a green onion before mincing the meat, which will save a lot of effort. Wash the meat, cut into long strips, and slowly feed in (the more meat you feed, the more effort it takes). After the meat is minced, you can also mince a green onion, or vegetables such as potatoes. To put it bluntly, this is a kind of disguised cleaning and can also reduce the waste of minced meat.

6. First prepare clean toothbrushes, test tube brushes and other auxiliary supplies, and then unload the machine in the opposite direction to clean out the minced meat in the machine cavity, and then soak the machine in warm water containing detergent. Clean all parts one by one with a toothbrush, etc., and then rinse twice with tap water. Put it in a cool and ventilated place to control dry.

 

0
Views: 449